3D-PRINT (BROOCH)

Transparent resin, there are some bad places. When the print is completed, it will be very sticky. Hard to remove sticky. Also relatively soft. The color is white and yellow.

1. When printed, it will have some support that will help maintain the shape. After that, that support needs to be removed and cut out, and need to use the sandpaper roll. Sand a little bit. Then this will be the matte finish. And also can remove some of the sticky things. Then need to spray the finishing to cover the sticky stuff.

2. After that I adding the fabric in the middle of the resin.In the middle follow the guide lines. Like the first collection

3.Because the overall print is transparent resin, so I want to add a little color to it. So I used the silver paint I used before.

which is the metallic color.

------sliver color.

(When I was looking for paint, I tried a lot of different colors. Spray paint on different materials. Spray paint on the metal sometimes there may be off. The resin is same. Spray paint may not be dry if misused. Will leave a lot of fingerprints. Spraying too much can also result in uneven color or color hoarding. Hard to dry.)

4.Final

the computer model

Try making the pattern in the middle

Second type

final effect

final effect